1" Universal Gyro Kit
Misc Mfg.
This 1" Universal Gyro Kit is perfect for old school BMX builds that use a 1" head tube. Includes top and bottom cable as well as top gyro plate, ...
View full details
This 1" Universal Gyro Kit is perfect for old school BMX builds that use a 1" head tube. Includes top and bottom cable as well as top gyro plate, ...
View full details1988 Haro Sport Survivor (Black/Chrome) This is a mostly original Haro Sport in survivor condition from 1988. Keep in mind it has some blemishes an...
View full detailsACS freewheel remover with a hex-style end that can mount in a bench vise or can be used with a wrench. Specific 6-spline tool for ACS Crossfire, ...
View full detailsThe ACS Paws 4.1 Freewheel is a great freewheel for throwback, old school or retro builds as well as current models of bikes that use threaded free...
View full detailsNickel plated sprocket ring fits 1/8” and 3/32” chains Cold forged for high-torque strength, and increased durability Three-pawl design provides e...
View full detailsThese freewheels are designed to be used with left-hand threaded hubs for left-side drivetrains. Intended for Left Hand Drive use only Uses tradit...
View full detailsPerfect for those rebuilding that old BMX bike they found at a garage sale. 20" Alloy 36 spoke 1.5" rims to work with tires up to 2.3 3/8" a...
View full detailsThe Alloy thread on Freestyle BMX pegs are made to look a lot like the original GT Freestyle Pegs from the 80's and 90's which make them perfect fo...
View full detailsThe AME Cam Grips are a blast from the past. These 80's inspired relics are brought back to life with some new technology to bring them up to today...
View full detailsThe AME Grip Savers are designed to do just what they say, save the grip. Made from a high impact nylon material “Made in America” at AME's manufa...
View full detailsThe AME Half Waffle Grip has been a staple in BMX grips for over 40 years now. With 4 decades of experience it only makes sense that this grip has ...
View full detailsThe AME Round Grips are made from Vulcathane, a specially blended rubber compound that resist changes to the rubber make up from the elements aroun...
View full detailsPerfect for those rebuilding that old BMX bike they found at a garage sale. Classic AME grips will help with your old school table tops
The AME Unitron Grips are a double layer treat straight out of the 80's. Back by popular demand, AME re-introduced the Unitron grips in the same st...
View full detailsMade to work with most BMX bikes using an American bottom bracket shell and a 1pc. crank. 24t
JUST LIKE YOUR UNCLE THAT RODE FOR REDLINE BACK IN 1984 HAD. JUST A PLAIN SIMPLE CAGED PEDAL. PRICE IS FOR A PAIR.
Perfect for those rebuilding that old BMX bike they found at a garage sale. Works with 1" threaded forks Alloy clamp area Steel quill
3 piece BMX style pad set with your choice of camo print Perfect replacement or upgrade to your old school BMX or Wheelie bike Kit includes top t...
View full detailsCold forged chromoly construction 8 splines for removal Oversize 3-pawl design Heavy duty use freewheel
Size: 20in Ft / Rr / St: SET Width ID (mm): 24 Axle: B/O 3/8 Rim Color: Sil Rim Model: Black Ops Hub Model: BkOps MX-1100 Sealed O.L.D.: 1...
View full detailsPerfect for those rebuilding that old BMX bike they found at a garage sale. Works with 1" threaded forks Alloy clamp area Steel quill ...
View full detailsPerfect for those rebuilding that old BMX bike they found at a garage sale. Works with 1" threaded forks Alloy clamp area Steel quill Retro Suntou...
View full detailsThe Bottema Forks are now a modern classic. Based on the classic design from Jeff Bottema these now come with a 1 1/8” threadless steerer tube for ...
View full detailsThe Bottema Forks are now a modern classic. Based on the classic design from Jeff Bottema these now come with a 1 1/8” threadless steerer tube for ...
View full detailsThe Bottema Forks are now a modern classic. Based on the classic design from Jeff Bottema these now come with a 1 1/8” threadless steerer tube for ...
View full detailsThe Bottema Forks are now a modern classic. Based on the classic design from Jeff Bottema these now come with a 1 1/8” threadless steerer tube for ...
View full detailsBox Two™ Freewheels combine durability with lightning-fast engagement. They feature nine, super durable pawls and are available in one of three cho...
View full detailsThe Bully Big Money Sprocket has all the bling. Comes in three vibrant colors that are a sure flex of status. Made from 6061 aluminum for strength ...
View full detailsPerfect for those rebuilding that old BMX bike they found at a garage sale. 175mm arms Works with 1/2" pedals Stu Thomson approved
Cook Bros. Racing Stainless Headsets feature two super-smooth, 45×45, sealed bearings covered by a coating of titanium nitride and filled with stai...
View full detailsCNC machined, 6061-T6 aluminum top cap, cups, compression ring and crown race. 45x45 angular sealed contact bearings which can also be used as int...
View full detailsThe CW Racing Grip Donuts are back. CW official licensed logo screen printed on a soft neoprene donut. Made in the USA by Flite BMX.
The Dia-Compe 750 Rear Center Pull Brake is a cold forged aluminum brake that was pretty commonly found on old 80's freestyle bikes. Perfect setup ...
View full detailsThe Dia-Compe 883 Nippon Caliper Brake was one of the most sought after brakes in the BMX freestyle world in the 80's and 90's an is a must have fo...
View full detailsThe Dia-Compe 883 Nippon Caliper Brake was one of the most sought after brakes in the BMX freestyle world in the 80's and 90's an is a must have fo...
View full detailsThe Dia-Compe FS-990 Brake could be the missing piece you need for your retro Freestyle BMX Bike build. These brake have been in production for 30...
View full detailsThe Dia-Compe MX1500N Seat Clamp is a reproduction of the original hinge style clamp from Dia-Compe. Comes in a few sizes and colors to fit a few a...
View full detailsWOW!!!!! A 3 disk set that has ALL 10 Dorkin' Videos. This is a must have! The riding in these videos is what today's riding is based off of. Regar...
View full detailsThe Dyno D-1 Stadium Checker Number Plates are an 80's staple. These are reproductions made by Flite BMX that use Dyno's Founder, Bob Morale's orig...
View full detailsThe Dyno D2 Padset is keeping the 80's alive. Going on almost 4 decades later, Flite BMX wanted to give you a blast from the past and went ahead an...
View full detailsThe iconic GT Pretzel bar is back! Featuring a one-piece main bar with pretzel cross bar support for added strength. 7.875" x 31.5" wide 9.125" x ...
View full detailsThe Dyno UL Number Plate is an exact repop of the original Dyno Ultra Light plate from the mid 80's. These are cut, shaped, formed and screened by ...
View full detailsThe Dyno UL Padset was recreated from original Dyno artwork and made in the USA by Flite BMX. Printed on textured nylon covers with crisp lines and...
View full details100% cotton Combed ring spun fine jersey Set in collar Taped shoulder to shoulder Etnies woven clamp label Light touch plastisol ink
Single wrapped vulcanized construction Single wrap vulcanized foxing tape Deconstructed upper with minimal padding Foam Lite 1 die-cut EVA footbed...
View full detailsSingle wrapped vulcanized construction Single wrap vulcanized foxing tape Deconstructed upper with minimal padding Foam Lite 1 die-cut EVA footbed...
View full details100% cotton Combed ring spun fine jersey Set in collar Taped shoulder to shoulder Etnies woven clamp label Light touch plastisol ink
100% cotton Combed ring spun fine jersey Set in collar Taped shoulder to shoulder Etnies woven clamp label Light touch plastisol ink