AME Cam Grips
AME
The AME Cam Grips are a blast from the past. These 80's inspired relics are brought back to life with some new technology to bring them up to today...
View full details
The AME Cam Grips are a blast from the past. These 80's inspired relics are brought back to life with some new technology to bring them up to today...
View full detailsThe AME Grip Savers are designed to do just what they say, save the grip. Made from a high impact nylon material “Made in America” at AME's manufa...
View full detailsThe AME Half Waffle Grip has been a staple in BMX grips for over 40 years now. With 4 decades of experience it only makes sense that this grip has ...
View full detailsThe AME Round Grips are made from Vulcathane, a specially blended rubber compound that resist changes to the rubber make up from the elements aroun...
View full detailsPerfect for those rebuilding that old BMX bike they found at a garage sale. Classic AME grips will help with your old school table tops
JUST LIKE YOUR UNCLE THAT RODE FOR REDLINE BACK IN 1984 HAD. JUST A PLAIN SIMPLE CAGED PEDAL. PRICE IS FOR A PAIR.
Cook Bros. Racing Stainless Headsets feature two super-smooth, 45×45, sealed bearings covered by a coating of titanium nitride and filled with stai...
View full detailsCNC machined, 6061-T6 aluminum top cap, cups, compression ring and crown race. 45x45 angular sealed contact bearings which can also be used as int...
View full detailsThe Dia-Compe MX1500N Seat Clamp is a reproduction of the original hinge style clamp from Dia-Compe. Comes in a few sizes and colors to fit a few a...
View full detailsThe Dyno UL Number Plate is an exact repop of the original Dyno Ultra Light plate from the mid 80's. These are cut, shaped, formed and screened by ...
View full detailsThe Dyno UL Padset was recreated from original Dyno artwork and made in the USA by Flite BMX. Printed on textured nylon covers with crisp lines and...
View full detailsSingle wrapped vulcanized construction Single wrap vulcanized foxing tape Deconstructed upper with minimal padding Foam Lite 1 die-cut EVA footbed...
View full details65% Polyester 35% cotton twill. 5 panel snapback with flat brim. Soft buckram reinforcement. 3 3/4” crown. Embroidered crown. Etnies clamp logo
The Flite BMX Retro Padset is made to the same specs as the original Flite padsets from back in the day. Perfect for your old school or retro BMX ...
View full detailsThe Flite BMX Retro Padset is made to the same specs as the original Flite padsets from back in the day. Perfect for your old school or retro BMX ...
View full detailsThe Flite Grip Donuts can give your BMX bike that retro 80's look for so little cost. I think the best word to describe them is RAD. Price is for...
View full detailsThe GT BMX Wings Grip Donuts are as 80's as it gets. Officially licensed by GT and made by Flite BMX in the USA.
The GT Mach One Pad Set By Flite are 90's inspired for that sweet retro look. Replicated from the original GT artwork from the Flite archives for a...
View full detailsThe Haro 1986 Sport threaded fork is made to be just like the originals from 1986. Works with most old school 1" threaded headsets. This fork is ...
View full detailsThe Haro Fusion alloy pedals are made to be very much like the ever so popular Shimano DX pedals from back in the 80's. The Fusion pedal features ...
View full detailsThe Haro Group 1 stem is an answer from the BMX gods. With Retro BMX bikes becoming so popular there needs to be a good 1 inch shafted stem availab...
View full detailsThe New Haro HPF Tire is the updated reproduction of the popular Haro HPF tires from back in the 1980's. The HPF tire came stock on 100's of Haro ...
View full detailsHaro Legends Sprocket 24mm Center bore (19mm and 22mm adpaters included)
Authentic Haro Master reproduction decals from the original Haro artwork. Haro went out of their way to make these to exact specifications of the ...
View full detailsThe Haro Series 1B BMX number plate is made to look just like the original plate that was designed by Bob Haro himself. This is a must for may earl...
View full detailsThe Kashimax MRS-SH Raild Seat was the seat of choice of many BMX pros in the 80's and 90's. Kashimax is now remaking them the exact same way they...
View full detailsKink Velcro Cable Straps are perfect for trying up your brake cable to keep it from flopping around. Price is for one strap and comes in a handful...
View full detailsThe MCS Lightning Brake Cable can give any bike a rad new look. 4 chrome color options for an original look. Comes with end to fit most BMX brake ...
View full detailsOriginally made in the 80's, MKS has brought back the popular BMX pedal Lightweight alloy body and cage Chromoly spindle 366g pair
The ODI Mushroom Grips are made to be very much like the iconic Mushroom grips from back in the 80's. These grips will be the perfect set up for an...
View full detailsYOU KNOW WHAT IT'S FOR. THE REGULAR ONES COME IN BLACK, RED, OR BLUE. SOME OF THE MISC "LIMITED EDITION" COLORS ARE ALSO LISTED.
Old School BMX Brake Cable Kit (Upper Gyro, Lower Gyro & Front Brake Cables) M6 and M7 barrel adjusters included
The Panaracer HP406 20" Tire was also known as the Peregrine HP BMX tires way back in the day. These tires would be a great tire for an old school ...
View full detailsThe Pro Neck Power Disc is back! 6061-T6 Aluminum BCD: 110 and 130 supported (designed for 39t and larger chainrings) 24mm bore Weight: 6oz Mad...
View full detailsThe Pro Neck Retro 1" Quill Stem is made to look a lot like the original old school Tuf Neck stems. The guys over at Knight Bike Co. did a great jo...
View full detailsThe Race Inc. Bottema RA26-B Bike is a 6061 T-6 aluminum frame, features a classic Race Inc., loop tail rear end and classic Race Inc. gussets comb...
View full detailsThe Race Inc. Retro RA24-R Bike is a 6061 T-6 aluminum frame, features a classic Race Inc., loop tail rear end and classic Race Inc. gussets combin...
View full detailsThe SE Bikes Bear Trap Pedals are an aluminum retro style BMX pedal with 9/16" spindles to fit most BMX cranks that are NOT 1pc. The Beartrap styl...
View full detailsThe SE Bikes Grip Donuts are made from neoprene and help prevent chaffing and blisters caused by grip flanges. They also look retro and cool. The...
View full detailsThe SE Racing wheel set is a 24" wheel set that was built to look very much like the old school wheel sets you'd find on so many of the BMX bikes f...
View full detailsThe SE Racing wheel set is a 26" wheel set that was built to look very much like the old school wheel sets you'd find on so many of the BMX bikes f...
View full detailsThe SE Racing wheel set is a 20" wheel set that was built to look very much like the old school wheel sets you'd find on so many of the BMX bikes f...
View full detailsSkyway Tuff Wheel II Mag 20" Cassette Wheelset is the same great wheels you remember from back in the day but with an updated rear hub. Everything ...
View full detailsThreaded BMX headset based on the MX-125 with a beartrap style washer 1 inch threaded, Old School size (32.7 x 26.4) Sealed bearings
Please note price is for cups only, if you need the full bottom bracket kit it can be found here.
The Theory American Bottom Bracket Kit includes two color matched american bottom bracket cups, matching colored cone spacers, two precision sealed...
View full details