Old School BMX Bikes and Parts

1988 Haro Sport Survivor (Black/Chrome) This is a mostly original Haro Sport in survivor condition from 1988. Keep in mind it has some blemishes an...

ACS freewheel remover with a hex-style end that can mount in a bench vise or can be used with a wrench. Specific 6-spline tool for ACS Crossfire, ...

Nickel plated sprocket ring fits 1/8” and 3/32” chains Cold forged for high-torque strength, and increased durability Three-pawl design provides e...

These freewheels are designed to be used with left-hand threaded hubs for left-side drivetrains. Intended for Left Hand Drive use only Uses tradit...

The AME Cam Grips are a blast from the past. These 80's inspired relics are brought back to life with some new technology to bring them up to today...

The AME Grip Savers are designed to do just what they say, save the grip. Made from a high impact nylon material “Made in America” at AME's manufa...

The AME Half Waffle Grip has been a staple in BMX grips for over 40 years now. With 4 decades of experience it only makes sense that this grip has ...

The AME Round Grips are made from Vulcathane, a specially blended rubber compound that resist changes to the rubber make up from the elements aroun...

The AME Unitron Grips are a double layer treat straight out of the 80's. Back by popular demand, AME re-introduced the Unitron grips in the same st...

Perfect for those rebuilding that old BMX bike they found at a garage sale. Works with 1" threaded forks Alloy clamp area Steel quill

3 piece BMX style pad set with your choice of camo print Perfect replacement or upgrade to your old school BMX or Wheelie bike Kit includes top t...

Cold forged chromoly construction 8 splines for removal Oversize 3-pawl design Heavy duty use freewheel

Size: 20in Ft / Rr / St: SET Width ID (mm): 24 Axle: B/O 3/8 Rim Color: Sil Rim Model: Black Ops Hub Model: BkOps MX-1100 Sealed O.L.D.: 1...

The Bottema Forks are now a modern classic. Based on the classic design from Jeff Bottema these now come with a 1 1/8” threadless steerer tube for ...

The Bottema Forks are now a modern classic. Based on the classic design from Jeff Bottema these now come with a 1 1/8” threadless steerer tube for ...

The Bottema Forks are now a modern classic. Based on the classic design from Jeff Bottema these now come with a 1 1/8” threadless steerer tube for ...

The Bottema Forks are now a modern classic. Based on the classic design from Jeff Bottema these now come with a 1 1/8” threadless steerer tube for ...

Box Two™ Freewheels combine durability with lightning-fast engagement. They feature nine, super durable pawls and are available in one of three cho...

The Bully Big Money Sprocket has all the bling. Comes in three vibrant colors that are a sure flex of status. Made from 6061 aluminum for strength ...

Cook Bros. Racing Stainless Headsets feature two super-smooth, 45×45, sealed bearings covered by a coating of titanium nitride and filled with stai...

CNC machined, 6061-T6 aluminum top cap, cups, compression ring and crown race. 45x45 angular sealed contact bearings which can also be used as int...

The CW Racing Grip Donuts are back. CW official licensed logo screen printed on a soft neoprene donut. Made in the USA by Flite BMX.

The Dia-Compe 750 Rear Center Pull Brake is a cold forged aluminum brake that was pretty commonly found on old 80's freestyle bikes. Perfect setup ...

The Dia-Compe MX1500N Seat Clamp is a reproduction of the original hinge style clamp from Dia-Compe. Comes in a few sizes and colors to fit a few a...

The Dyno D-1 Stadium Checker Number Plates are an 80's staple. These are reproductions made by Flite BMX that use Dyno's Founder, Bob Morale's orig...

The Dyno D2 Padset is keeping the 80's alive. Going on almost 4 decades later, Flite BMX wanted to give you a blast from the past and went ahead an...

The Dyno UL Number Plate is an exact repop of the original Dyno Ultra Light plate from the mid 80's. These are cut, shaped, formed and screened by ...

The Dyno UL Padset was recreated from original Dyno artwork and made in the USA by Flite BMX. Printed on textured nylon covers with crisp lines and...

100% cotton Combed ring spun fine jersey Set in collar Taped shoulder to shoulder Etnies woven clamp label Light touch plastisol ink

Single wrapped vulcanized construction Single wrap vulcanized foxing tape Deconstructed upper with minimal padding Foam Lite 1 die-cut EVA footbed...

Single wrapped vulcanized construction Single wrap vulcanized foxing tape Deconstructed upper with minimal padding Foam Lite 1 die-cut EVA footbed...

100% cotton Combed ring spun fine jersey Set in collar Taped shoulder to shoulder Etnies woven clamp label Light touch plastisol ink

100% cotton Combed ring spun fine jersey Set in collar Taped shoulder to shoulder Etnies woven clamp label Light touch plastisol ink

65% Polyester 35% cotton twill. 5 panel snapback with flat brim. Soft buckram reinforcement. 3 3/4” crown. Embroidered crown. Etnies clamp logo

Old school BMX layback style fluted seat post. Length: 490mm

The GT BMX Freestyle Grip Donuts are officially licensed by GT, and made by Flite BMX in the USA. 1988 specials subliminally printed for a clean lo...

The GT BMX Wings Grip Donuts are as 80's as it gets. Officially licensed by GT and made by Flite BMX in the USA.

The GT Mach One Pad Set By Flite are 90's inspired for that sweet retro look. Replicated from the original GT artwork from the Flite archives for a...

The GT Team 1993 - 1994 Padset is a mid school master piece. Recreated from original art work by Flite BMX, made in the USA. Frame pad: 12" wide, ...

The 1986 Vintage fork has been built to replicate the original 1986 fork. Made from the same spec and material as our original forks back in the 80...

Haro Legends Sprocket 24mm Center bore (19mm and 22mm adpaters included)

Haro's Lineage bashguard has been designed for the new bashguard complete bikes and frames. Made from a nylon mold, this guard allows you to grind ...

Much Like the original Super Pro Wheels the new Haro Vintage wheel set includes a sealed bearing hubs with 3/8" axles in both the front and the rea...