1" Threaded Headset
S&M
Traditional 1” threaded headset style fits the bill for restorations or retro builds. Hardened chrome plated cups, caged ball bearings, a press on...
View full detailsTraditional 1” threaded headset style fits the bill for restorations or retro builds. Hardened chrome plated cups, caged ball bearings, a press on...
View full detailsRISE 6" WIDTH 23" UPSWEEP 2° BACK SWEEP 11° CROSS BAR .625" WEIGHT 1.8 lb (.86 kg) MATERIAL 4130 CrMo Straight Guage
14" OEM WHEELSET 16 Hole single wall 3/8" sealed front 3/8" sealed rear 9T cassette
RISE 7" WIDTH 24" UPSWEEP 2° BACK SWEEP 11° CROSS BAR .625" WEIGHT 1.9 lb (.86 kg) MATERIAL 4130 CrMo Straight Gauge
The Fit 18" Wheelset is the perfect replacement / upgrade wheelset for your little rippers 18" Wheeled bike. Sealed rear hub and 9t driver are a ju...
View full detailsThe Fit 20 inch Wheelset gets you rolling for very little money. This BMX wheelset comes with both a front and rear wheel and features sealed beari...
View full detailsThe Fit 22" Wheelset is a super solid wheelset for not a lot of money. Fit uses the same sealed bearing hubs on all their wheels as well as a soli...
View full detailsThe Fit 24" Cassette Wheelset is built with The Fit double walled rim to be strong yet tough laced to a fully sealed bearing hubset. 3/8″ Front...
View full detailsThe Fit 26" Wheelset is built with Fit's solid sealed bearing hubs to a double walled rim with pinned seam. On the 26" version of these wheel Fit ...
View full detailsRise: 9.5″Width: 29″Back Sweep: 11.5°Up Sweep: 3°Weight: 2.7 lb / 1.22 kg
The Fit Aitken Stem is the signature stem of one of the best BMX riders to ever shred the planet, Mike Aitken. Made from 6061 T6 Aluminum and with ...
View full detailsThe Fit Alloy Pedals use an oversized chromoly spindle for added strength and is shaped to give the best feel and grip but keeps the pins a bit out...
View full detailsThe Fit ARC 22" Rim looks great and has a good strength to weight ratio for all styles of BMX riding. Fit was sure to make the ARC rim double walle...
View full detailsThe Fit ARC Rim looks great and has a good strength to weight ratio for all styles of BMX riding. Fit was sure to make the ARC rim double walled an...
View full detailsThe legendary BF stem is back! At just over 28MM tall it’s in the middle of Fit's Aitken and High-Top stems. With two lengths to choose from with a...
View full detailsThe Fit Blade V3 Fork is built from 100% chromoly that goes through the 4Q baked post weld heat treating process for strength. Fit increases the st...
View full detailsStrong cranks that can withstand grinds and don’t cut ankles. Complete Bottom Bracket included.Investment cast “Blunt” spindle bosses and flush mo...
View full details100% “4Q Baked”, Heat Treated 4130 CrMo Straight Gauge .065″ Wall 4130 CrMo Tubing Dual Radius Bends w/ large top bend to increase strength Americ...
View full detailsThis is a limited edition re-run of the OG Eddie Cleveland grip. Made in the USA by ODI with a super soft compound that has a smaller diameter than...
View full detailsThe Fit Underinflated F/U Tire was made for riders that prefer low air pressure in their tires. Fit made the F/U tires with a higher than normal th...
View full detailsThe Fit FAF tire is a semi light yet durable tire made for all around BMX riding. The FAF is Fast as F&@$ and is the top choice of many pro BMX...
View full detailsThe Fit Freecoaster 18" Wheelset is a great upgrade wheelset for your little rippers 18" BMX bike and even comes with a sealed Freecoaster hub for ...
View full detailsThe Fit Freecoaster 20 inch Wheelset is one great deal. You get a sealed rear Freecoaster wheel with 9t driver laced to a double walled Fit rim. In...
View full detailsThe Fit Freecoaster 22 inch Wheelset is the perfect set up. to get your 22' upgraded to a freecoaster set up. Sealed 3/8" Front Axle Sealed ...
View full detailsJordan Hango Signature Stem. Made in USA. Reach: 48mm Stack Height: 28.5mm Rise: 24mm (upright), 6mm (inverted) Clamp Bolts: 8×1.25mm (...
View full detailsOne of the highest rise top load stems on the market. 6061-T6 Aluminum Grade 8 Allen head hardware American Made 36mm (upright) Rise 51mm Re...
View full detailsSmaller design for smaller hands. Used on FIT 12″, 14″ and 16″ bikes for 2020 model year. Extra soft and tacky rubber Thick midsized flange design...
View full detailsThe Fit No-Logo OEM 19mm Crankset uses a 48 spline 19mm spindle just like the high end aftermarket cranks but at a great price. Fit is even nice en...
View full details4Q Baked 4130 CrMo Tubing Dual Radius Bends w/ large top bend to increase strengthMade in the USA Rise: 9" Width: 29" Back Sweep: 12° Up Sweep:...
View full detailsFit's O.G. Pegs are super strong and light thanks to butted and heat-treated 4130 CrMo. Remember steel is real! Material: 4Q Baked 4130 CrMo Butt...
View full detailsLittle tires are hard to find, but Fit comes to the rescue with the OEM 12 X 2.1" tires to fit all 12" BMX bikes. All-terrain tread pattern, durabl...
View full detailsThe Fit OEM 12" Wheelset is the best stock wheels you'll find for a 12" bike. Features a sealed bearing 9t cassette hub in the rear and a 3/8" axle...
View full detailsFinding legit 14" tires can be a treasure hunt, but Fit marks the spot with the OEM 14" tires. All-terrain tread and durable rubber casing foll fas...
View full detailsThe Fit OEM 16" Wheelset is the best stock wheels you'll find for a 16" bike. Features a sealed bearing 9t cassette hub in the rear and a 3/8" axle...
View full detailsPC bar ends with embossed Fit logo. Price is for a pair.weight = .5 oz a pair.
The Fit PC Pedals follow the same ergonomic shape as the metal versions that are designed to grip your foot better than traditional shapes. Micro k...
View full detailsThe Fit PVC 4.5" Replacement Sleeve is made to fit on the Fit PVC peg. This is the perfect way to freshen up your thrashed pegs for just a few buc...
View full detailsThe Fit PVC Peg have a 4130 chromoly steel core that is wrapped in an injection molded, PC sleeve for fast girding on many surfaces. Fit was sure t...
View full detailsJordan Hango’s Signature Handlebar. Classic geometry but with thicker tubing for modern riding. Rise: 8.85" / 10" Width: 29" Back Sweep: 12 Up Sw...
View full detailsThe Fit Shiv V3 Fork is built from 100% chromoly that goes through the 4Q baked post weld heat treating process for strength. Fit increases the str...
View full detailsAnother piece of fire in street beast Ethan Corriere's sleeper line. The Fit Sleeper Bar feature a relaxed geometry and butted tubing. Rise: 9.25″...
View full detailsThe Fit Sleeper Peg was built by fit and designed by Fit BMX pro, Ethan Corriere. Made to be stong and lightweight the Sleeper Peg is made from a p...
View full detailsThe Fit Sleeper Peg Replacement Sleeve was made for those running the Fit Sleeper Pegs and have ground through their current sleeve. Available in t...
View full details