BMX Bike Parts

1/8" Single Speed Design  106 Lengths 

The Animal Hoder 710 chain is the signature chain from Animal's team rider and over all ANIMAL, Mike Hoder. If you know much about Mike or his ridi...

The Box Three chain is polished and then chemically treated to achieve corrosion resistance. All Prime 9 chains have chamfered shifting edges, soli...

The Box Two chain's nickel plating adds both corrosion and wear-resistance. All Prime 9 chains have chamfered shifting edges, solid plates and soli...

The BSD 1991 Half-Link Chain is built tough and coated in teflon to help with rustproofing. BSD was nice enough to stamp their logo into each plate...

A super tough chain with pre-installed half link, rustproof and teflon coating, stamped BSD logos and mushroomed pins. Compatible with 8t drivers. ...

The Bully Half Link Chain is a heavy duty chain with square riveting. Bushing less DHA Chromium Hardened Pin 116 links

This Chain Master Link helps you pit together your chain without the need of a chain tool.

The Cinema Sync Chain is a half link chain helping give better adjust-ability for your back wheel placement. The Sync is built from forged pins and...

The Connex 1R8 Chain is a heavy duty chain perfect for most single speed applications. Features a high grad nickel coating to protect against corro...

Strong and affordable 1/8" chain based on the original 410 with stamped cult logos and a teflon coating. Includes a pre-installed half link to make...

The Cult 510 chain features a Teflon coating with stamped Cult logos, heat-treated riveted pins, and thicker side plates to increase strength and p...

The Cult half link chain features a Teflon coating with engraved Cult logos and is designed to help dial in the rear end length on frames with shor...

Material: steel, chromized treatment Size: 1/2″ x 1/8″ Features: bullet-proof design / very strong pins & plates Weight: 454g (16.2oz : 1lbs...

Material: steel, chromized treatment Size: 1/2″ x 1/8″ Features: lightweight design / very strong pins & plates / comes with extra half-link...

The Eclat Stroke Half Link Chain give you all the advantages of a half link chain but with slotted links to help save a little weight. 100 Links 1...

Fly wanted to bring you a chain you could trust the life of your knee cap with. The Fly Tractor Chain features extra thiccc plates, hardened roller...

The G-1 chain adjusters are extruded then CNC machined from 6061-T6 aluminum Body: 35mm wide 6061-T6 aluminum Weight: 2.78oz. pair Two 10mm mounti...

1/2"x1/8" heavy-duty standard link chain 1,000 KGF tensile strength Nickle plated master link included

1/2"x1/8" heavy-duty half-link chain 1,000 KGF tensile strength Nickle plated master link included

The Izumi 410 Chain is made in Japan and has been around for just about forever. Classic 410 style with an attention to detail. 1/8" 116 links

The KMC (K1SL) K710SL Chain is light, tight and ready to fight.  Hollow pins and plates to help save weight and look cool.   Don't let that fool yo...

KMC 410H Chain   MADE FOR THOSE WHO NEED A STRONG CHAIN BUT DON'T WANT THE BIG THICK GIANT STREET CHAIN. WE LIKE THIS CHAIN ALOT. NOT THAT YOU CARE...

The KMC 415H Chain is perfect for any mid school build or maybe a Harley. 3/16" plates for big dawgs that want to hit their chain on every ledge kn...

EVER HAVE THE PROBLEM WHERE YOUR CHAIN IS ALITTLE TO LONG BUT WHEN YOU TAKE A FULL LINK OUT IT IS TOO SHORT?? HERE IS WHAT YOU NEED. IT'S A HALF LI...

The KMC HL1 Chain is KMC's standard BMX half link chain. The wide version is the 1/8" version and works on both 1/8" and 3/32" drive trains. Half l...

The KMC HL1L Wide Chain is much like the original KMC half link chain but features hollow pins. The hollow pins reduce weight without sacrificing h...

KMC HL710 Half Link Chain A 1/8" KMC CHAIN MADE UP COMPLETELY OF HALF LINKS. THIS MEANS IT'S HARDER TO PULL APART AND MAKES IT BETTER FOR GETTING ...

The KMC K710 Chain features a taller inner and outer plate to help reduce the chance of the chain popping off the sprocket. A strong, built to last...

PLAIN OLD CHAIN THAT FITS MOST BIKES. WHAT MORE CAN WE SAY?

KMC Z1EHX CHAIN Mushroomed rivets for increased chain strength Heavy duty structure Anti-drop design Stretch proof treatment Internal hub compatib...

The narrow version of the KMC Z1EHX chain is 3/32" compatible only. This heavy duty single speed chain uses mushroomed rivets for increased strengt...

1/2 x 1/8 x 112L factory installed half link heavy duty stretch proof mushroomed pins bushingless construction drop proof sides noiseless functi...

The KMC Z6 Chain is a basic, affordable replacement chain for use on 6 and 7 speed bikes. Features inner plate chamfering to smooth shifting Z-bri...

MCS Half Link Race Chain (3/32") Square Riveting Hollow Pin Power  DHA Chromium Hardened Pin Bushing Less Links: 100 Weight: 341.89 grams / 12.06...

Square Riveting High Pin Power  DHA Chromium Hardened Pin 1/2" x 3/32" *Will not work on 1/8" sprockets* 116 Links

Hollow pins for weight savings 1/2" x  3/32"   *Will not work on 1/8" sprockets* 116 Links

The Merritt HL1 Half Link chain gets you all the goodness of most of the other half link chains on the BMX market but with a smaller price tag. In...

The Mission Half Link allows for you to get a precise adjustment with your existing chain. Pushpin type half-link connector for fine-tuning your c...

The Mission Half Link Chain uses teflon coated links with rounded side plates that allow the mission chain to work on 8T drivers. Half link design ...

The Bluebird Chain uses a standard KMC 510-HX link and plate configuration and includes a KMC Pintle half-link that's pre-installed at the factory....

Half-links allow for a more precise fit on the wide variety of gearing and chainstay length combinations out there. Odyssey’s Bluebird Half-Link ch...

THIS THING IS A BEAST. CUTS PRETTY MUCH ANY CHAIN, 1/8" OR 3/16". CHAIN TOOL IS SLIGHTLY LARGER THAN AVERAGE, MAKING IT EASIER TO HANDLE. REPLACABL...

SICK OF BUYING THOSE CHEAP CHAIN TOOLS THAT ONLY LAST A FEW USES?? REFUSE TO SPEND $30+ DOLLARS ON A SUPER GOOD CHAIN TOOL?? THE CT-5 IS FOR YOU ...

The Primo 121 Half-Link Chain is heat-treated and engraved with the Primo logo. The half link design makes more precise rear end length adjustment...