BMX Bike Parts

The Alienation Dime 4-Piece Bars offer the classic shape and specs of any traditional 4-piece bar. The Dime bars are made from a post weld heat tre...

The Alienation Dime Bars are made from a post weld heat treated 4130 chromoly. The Dime bars use a deeper knurled clamping area to prevent any slip...

The BSD Acid V2 Fork was designed to take on heavy abuse. BSD beefed up the high stress points to make sure the Acid V2 fork can take whatever you ...

The Dropped stem is BSD's new front load stem, at only 10mm rise it means you can get your bars as low as possible, which is great if you like the ...

The BSD Dust fork is the middle of the road option for guys that don't want to get too... techy? BSD provides a perfect middle ground with this 26m...

David Grant signature Raider handlebars from BSD. The Raider bars feature a massive 10" rise and are made from multi-butted post weld heat treated ...

Twist the wrists. The BSD Safari bars are Reed Stark's updated ape hangers and feature a wrist-friendly 3 degree upsweep and 13 degrees back. Multi...

The BSD Stacked stem is the tallest stem BSD offers, 33mm tall so you can get them bars to the moon. CNC machined from 6061-T6 aluminum to keep it ...

Single bolt design, 2.5pc cranksHeat treated 4130 chromoly arms with rectangular cross section for increased stiffness.  Heat treated 4130 chromoly...

A new updated version of the Substance XL crank with a new invest cast boss design that sits fully flush with the crank arm completely eliminating...

The Capital BMX Mortar Topload Stem is a USA made stem for riders by riders. Machined from 6061-T6 aluminum alloy in St. Louis. Clean lines and aes...

This Chain Master Link helps you pit together your chain without the need of a chain tool.

The Cinema Sync Chain is a half link chain helping give better adjust-ability for your back wheel placement. The Sync is built from forged pins and...

The Cult Redemption Top Load Stem is the signature stem of Cult Crew team rider, Chase Dehart. Chase wanted a top load stem but didn't want it to p...

Cult Salvation V4 Stem is much like the original Cult Salvation top load stem but built a bit to be a stronger by making it wider. Cult made the Sa...

The Fiend Cab front hub is a flangeless BMX hub with included nylon hub guards on both sides. The Cab hub uses high quality sealed bearings, a chro...

Integrated Headset with 45/45 spec sealed cartridge bearings, 10mm stack height aluminum cap with internal O-ring and laser etched Fiend logos. Ava...

The Fiend Mid Bottom Bracket includes two R12 sealed bearings with alloy cones and matching spacers to help you set up the perfect alignment. Avai...

Rise: 9.5″Width: 29″Back Sweep: 11.5°Up Sweep: 3°Weight: 2.7 lb / 1.22 kg

Jordan Hango’s Signature Handlebar. Classic geometry but with thicker tubing for modern riding. Rise: 8.85" / 10" Width: 29" Back Sweep: 12 Up Sw...

Another piece of fire in street beast Ethan Corriere's sleeper line. The Fit Sleeper Bar feature a relaxed geometry and butted tubing. Rise: 9.25″...

The Fit Young Buck Bar was built with Fit Riders Kole Voelker, Mikey Andrew and Max Miller in mind.  BMX Handle Bars Made in the USA by BMX riders ...

Reach: 40mm/50mm Rise: 32mm Stack Height: 30mm Weight: 10.35oz Color: Black, Silver

The Kink Bold HRD Stem is made from cast aluminum with a forged cap. All is held together with 6 solid 6mm allen hex bolts. This is a rad stem for ...

Weight: 29.0oz Colors: Black ED, Chrome, Raw Rise: 9.5” Width: 29.5” Backsweep: 12° Upsweep: 1° 13-Butted 4130 Chromoly Steel TruTherm Post Weld...

The Merritt Battle Crank is an insanely strong BMX crank set. They feature 4130 Chromoly arms and a 48 splined 22mm Spindle. Merritt also includes ...

The Mission Control Stem is a high quality top load stem at a great price. Forged from 6061 aluminum with a cold forged cap you know the Control St...

The Primo 121 Half-Link Chain is heat-treated and engraved with the Primo logo. The half link design makes more precise rear end length adjustment...

The Primo Stevie Churchill cranks feature a 24mm oversized chromoly spindle and heat treated chromoly arms. Stevie is pretty hard on BMX parts so y...

Profile 3 Piece Cranks have been by far the most popular cranks in BMX for many years. Included in the crankset is 2 arms, the spindle and all the...

Profile 3 Piece Cranks have been by far the most popular cranks in BMX for many years. Included in the crankset is 2 arms, the spindle and all the ...

The RNC Aluminum Cranks are made from a fancy aluminum that keeps them stronger than other alloys with a higher strength to weight ratio than titan...

Can you believe we have made it to the point to where we need 12" rise bars??  Believe it!  The S&M 12 Step Bar is a real thing so if you are a...

S&M's Made in USA 4 piece cro-mo bars pay homage to the 80’s and the glory days of cruiser racing! With modern materials and timeless geometry,...

The Hoder High Bars are huge and pissed of...much like Mike Hoder himself. RISE 8.625" WIDTH 30" UPSWEEP 1.5° BACK SWEEP 11° CROSS BAR ....

The Hoder High Bars are huge and pissed of...much like Mike Hoder himself. 9" rise 11118.5 11 degree back sweep 1.5 degree up sweep 30" wide weig...

Big & Strong, they got it going on. S&M Hoder Sky High bars are made in USA from straight gauge 4130 chromoly to S&M/Hoder bad man spe...

RISE: 9.75″ WIDTH: 31″ UPSWEEP: 1.5° BACK SWEEP: 11° CROSS BAR: .75″ WEIGHT: 2.70 lb (.083″)

REALLY?? DO YOU NEED BARS THAT ARE 10" TALL?? NO MATTER IF YOU DO OR NOT YOU PROBABLY WANT THEM ANYWAY. MADE FROM HEAT TREATED CHROMOLY 10" ...

S&M Sand Bar Dave Krone Signature Bar RISE 9.25″ WIDTH 29″ UPSWEEP 2° BACK SWEEP 12° CROSS BAR .750″ WEIGHT 2.5 lb MATERIA...

FEATURES: Heat-treated 4130 Chromoly arms and 1-pc spindle/sprocket boss for precision sprocket alignment. RHD/LHD compatible.SPINDLE: 19mm, hollo...

Top cap is a 6061-T6 aluminum forging for additional reinforcement in the bar clamping area. Cast aluminum body Reach: 48mm Height: 34mm Weight...

The Sunday Integrated Headset features your standard 45x45 bearings and includes several spacer options to get your stem height just right. BEARI...