BMX Bike Parts

Eclat 1023 Stem CNC machined in Kyoto, Japan by Mullet Products 48mm reach 23mm rise (Top Load setup) Designed to be also run flipped (10mm) for a...

Material: steel, chromized treatment Size: 1/2″ x 1/8″ Features: bullet-proof design / very strong pins & plates Weight: 454g (16.2oz : 1lbs...

Material: steel, chromized treatment Size: 1/2″ x 1/8″ Features: lightweight design / very strong pins & plates / comes with extra half-link...

The Eclat Stroke Half Link Chain give you all the advantages of a half link chain but with slotted links to help save a little weight. 100 Links 1...

The Fiction Savage Headset is an integrated style headset featuring two precision sealed bearing and a 15mm tall CNC alloy bearing bearing cover. ...

The Fit Alloy Pedals use an oversized chromoly spindle for added strength and is shaped to give the best feel and grip but keeps the pins a bit out...

One of the highest rise top load stems on the market.    6061-T6 Aluminum Grade 8 Allen head hardware American Made 36mm (upright) Rise 51mm Re...

The Flexible Brake Noodle is perfect for those running a brake cable with a sharp bend. The flexible construction resists compression and adjusts a...

Fly wanted to bring you a chain you could trust the life of your knee cap with. The Fly Tractor Chain features extra thiccc plates, hardened roller...

FOR THOSE WHO KILL HEADSETS ON A REGULAR BASIS. OVERSIZED BOTTOM CUP IS MUCH LIKE A PRIMO CUP. TOP CUP WORKS FINE WITH A GYRO / ORYG TOO. BUY ONE A...

The GT Bikes Cheat Code Alloy Peg is built from 6061 aluminum to keep the weight down but still maintaining strength. The Knurled surface gives max...

31.8 Bar Clamp Reach: 35mm Rise: 21mm Stack Height: 37mm Weight: 6.7oz Extra Wide 55mm body for extra clamping power

Length: 110mm (4.33") Weight: 6.6oz./each Five anti-roll pin positions Laser-etched GT logos for the finishing touches

The GT Bikes 2018 Superlace Hubs are made to look a lot like the original GT Superlace hubs from the 1980's but in a new updated cassette version. ...

Reach: 49mm Rise: 35mm Stack Height: 32mm Weight: 11.45oz • Wide 46mm body for extra clamping power.

The G-1 chain adjusters are extruded then CNC machined from 6061-T6 aluminum Body: 35mm wide 6061-T6 aluminum Weight: 2.78oz. pair Two 10mm mounti...

The GT Mallet Stem is made to look a lot like the iconic BMX stem from the 1980's that GT had used on many of their top of the line models. Today's...

The GT Mallet style quill stem is made to look a lot like the very popular GT Mallet stem from back in the 80's. Since the GT ones are not all that...

Reach: 40mm, 50mm Rise: 15mm Stack Height: 35mm Weight: 8.92oz

The GT Power Series American Bottom Bracket is perfect for those retro build with frames that have an American bottom bracket shell. Includes 2 sea...

The GT Power Series Integrated Headset gives you the look and feel of retro GT BMX Epoch headsets but for the modern day BMX Bike. 45/45 campy spe...

1/2"x1/8" heavy-duty standard link chain 1,000 KGF tensile strength Nickle plated master link included

1/2"x1/8" heavy-duty half-link chain 1,000 KGF tensile strength Nickle plated master link included

The Haro Fusion Alloy Crank w/Bottom Braket is made to look a lot like the originals from back in the late 80's and early 90's. The Fusion cranks w...

The Haro Fusion Alloy Pegs are made to look just like the Fusion pegs from in the 90's that Dave Mirra used. However the new version are made of a...

The Haro Fusion alloy pedals are made to be very much like the ever so popular Shimano DX pedals from back in the 80's. The Fusion pedal features ...

The Haro Legends Pegs got that grip. If you are looking for some pegs to slide on your favorite ledge or rail, than look elsewhere because these ar...

The Izumi 410 Chain is made in Japan and has been around for just about forever. Classic 410 style with an attention to detail. 1/8" 116 links

The Kink Bold HRD Stem is made from cast aluminum with a forged cap. All is held together with 6 solid 6mm allen hex bolts. This is a rad stem for ...

The Kink Headset Spacers are made from 6061 aluminum and come in a pack of three that include a spacer in 2.5mm, 5mm and 10mm. With those size opt...

The Kink Highrise Stem is CNC Machined from 6061 aluminum and is ready for whatever type of BMX riding you plan to throw at it. Rise: 31.5mm Stack...

Available in two sizes, small 22.2mm and traditional 31mm. Small size stays hidden under the grip and is extra hand-friendly for bar spins. Standar...

The Kink Integrated II headset has all the same specs as the regular Kink Intergrated headset like High-Quality Sealed Bearings. Standard Campy Spe...

The Kink Lightest Bar Ends fit most bars, go in easy, stay in good an look pretty sweet. This simple design uses an internal grub screw to hold the...

The Kink Mid Bottom Bracket Kit comes in all sizes, style and a bunch of colors. Kit includes 2 bearings, aluminum cones and spacers and a handful ...

The Kink Restrain ll Brake Lever is the fine dining of levers. Some subtle refinements of the original Restrain lever make this an exquisite piece....

The KMC HL1 Chain is KMC's standard BMX half link chain. The wide version is the 1/8" version and works on both 1/8" and 3/32" drive trains. Half l...

The KMC HL1L Wide Chain is much like the original KMC half link chain but features hollow pins. The hollow pins reduce weight without sacrificing h...

The narrow version of the KMC Z1EHX chain is 3/32" compatible only. This heavy duty single speed chain uses mushroomed rivets for increased strengt...

1/2 x 1/8 x 112L factory installed half link heavy duty stretch proof mushroomed pins bushingless construction drop proof sides noiseless functi...

The KMC Z6 Chain is a basic, affordable replacement chain for use on 6 and 7 speed bikes. Features inner plate chamfering to smooth shifting Z-bri...

The Knight Cable Hanger is CNC machined aluminum cable hanger for zero flex brake feel and uitilizes one allen screw to pinch cable. Strong and mor...

The Knight Ruf Neck Top Load Stem made from 6061-T6 Aluminum. Etched logo on both the top and bottom so the Ruf Neck can be ran as traditional top ...

The Knight Ruf-Nut Headset Cap is CNC machined from 6061-T6 Aluminum. Has a vintage look, perfect an old school build or some extra flare on your w...

Square Riveting High Pin Power  DHA Chromium Hardened Pin 1/2" x 3/32" *Will not work on 1/8" sprockets* 116 Links

Hollow pins for weight savings 1/2" x  3/32"   *Will not work on 1/8" sprockets* 116 Links

Cap Only 20mm tall CNC’d 6061 aluminum cap laser engraved logos Weight: 1oz