Alienation Dime 4-Piece Bars
Alienation
The Alienation Dime 4-Piece Bars offer the classic shape and specs of any traditional 4-piece bar. The Dime bars are made from a post weld heat tre...
View full detailsThe Alienation Dime 4-Piece Bars offer the classic shape and specs of any traditional 4-piece bar. The Dime bars are made from a post weld heat tre...
View full detailsThe Alienation Dime Bars are made from a post weld heat treated 4130 chromoly. The Dime bars use a deeper knurled clamping area to prevent any slip...
View full detailsThe BSD Acid V2 Fork was designed to take on heavy abuse. BSD beefed up the high stress points to make sure the Acid V2 fork can take whatever you ...
View full detailsThe Dropped stem is BSD's new front load stem, at only 10mm rise it means you can get your bars as low as possible, which is great if you like the ...
View full detailsThe BSD Dust fork is the middle of the road option for guys that don't want to get too... techy? BSD provides a perfect middle ground with this 26m...
View full detailsDavid Grant signature Raider handlebars from BSD. The Raider bars feature a massive 10" rise and are made from multi-butted post weld heat treated ...
View full detailsTwist the wrists. The BSD Safari bars are Reed Stark's updated ape hangers and feature a wrist-friendly 3 degree upsweep and 13 degrees back. Multi...
View full detailsThe BSD Stacked stem is the tallest stem BSD offers, 33mm tall so you can get them bars to the moon. CNC machined from 6061-T6 aluminum to keep it ...
View full detailsSingle bolt design, 2.5pc cranksHeat treated 4130 chromoly arms with rectangular cross section for increased stiffness. Heat treated 4130 chromoly...
View full detailsA new updated version of the Substance XL crank with a new invest cast boss design that sits fully flush with the crank arm completely eliminating...
View full detailsThe Capital BMX Mortar Topload Stem is a USA made stem for riders by riders. Machined from 6061-T6 aluminum alloy in St. Louis. Clean lines and aes...
View full detailsThis Chain Master Link helps you pit together your chain without the need of a chain tool.
The Cinema Sync Chain is a half link chain helping give better adjust-ability for your back wheel placement. The Sync is built from forged pins and...
View full detailsThe Cult Redemption Top Load Stem is the signature stem of Cult Crew team rider, Chase Dehart. Chase wanted a top load stem but didn't want it to p...
View full detailsCult Salvation V4 Stem is much like the original Cult Salvation top load stem but built a bit to be a stronger by making it wider. Cult made the Sa...
View full detailsThe Fiend Cab front hub is a flangeless BMX hub with included nylon hub guards on both sides. The Cab hub uses high quality sealed bearings, a chro...
View full detailsIntegrated Headset with 45/45 spec sealed cartridge bearings, 10mm stack height aluminum cap with internal O-ring and laser etched Fiend logos. Ava...
View full detailsThe Fiend Mid Bottom Bracket includes two R12 sealed bearings with alloy cones and matching spacers to help you set up the perfect alignment. Avai...
View full detailsThe Fiend Morrow V3 Stem is designed by Fiend team rider , Ty Morrow and is built to take the abuse he can throw at it. This stem is built with a t...
View full detailsRise: 9.5″Width: 29″Back Sweep: 11.5°Up Sweep: 3°Weight: 2.7 lb / 1.22 kg
Jordan Hango’s Signature Handlebar. Classic geometry but with thicker tubing for modern riding. Rise: 8.85" / 10" Width: 29" Back Sweep: 12 Up Sw...
View full detailsAnother piece of fire in street beast Ethan Corriere's sleeper line. The Fit Sleeper Bar feature a relaxed geometry and butted tubing. Rise: 9.25″...
View full detailsThe Fit Young Buck Bar was built with Fit Riders Kole Voelker, Mikey Andrew and Max Miller in mind. BMX Handle Bars Made in the USA by BMX riders ...
View full detailsReach: 40mm/50mm Rise: 32mm Stack Height: 30mm Weight: 10.35oz Color: Black, Silver