BMX Bike Parts

The Demolition Kevin Peraza Drawings Pivotal Seat uses a fat padded base wrapped in a two piece cover. The top has a textured canvas while the side...

Kevin Peraza Signature Fits 2.4 + Tires Full 100% 4130 Heat-Treated CR-MO Hydroformed Tapered Legs Height: 318mm One piece steerer w/ axes logo Bu...

Kevin Peraza Signature Front Load Stem Reach: 50mm Stack Height: 32mm Rise: 8.5mm (upright) / 23.5mm (inverted) Weight: 10.0 oz

The Demolition Momentum 26" Tire is almost identical to its smaller 20" version, just a tad bit heavier. Utilizing the same rectangle pattern tread...

The Demolition Momentum II 26" Tire is an even closer replica to the original 20" version of the Momentum tire. Now in a wider 2.4" width. 60TPI ca...

The Demolition Momentum II 29" Tire is an even closer replica to the original 20" version of the Momentum tire. Now in a wider 2.4" width. 60TPI ca...

The Demolition Revolt 24mm Cranks are for the big dawgs. Built with heat treated chromoly arms that have a ridge face for added strength and stiffn...

Spindle: 19mm Hollow/ Heat Treated Chromoly Spindle Bolts: 3/8″ x 24T Flush Mount Spindle Splines: 48 Sprocket Bolt: 10×1.5mm Mid 19mm BB, cones, ...

The Demolition Rotator V4 ProPlus Freecoaster Wheel features Demolition's all new Rotator V4 Freecoaster laced up to the new Zero Plus rim. All new...

The Demolition Team Cassette Wheel is a super solid wheel with cost in mind. The Team wheel features Demolition's Whistler Hub laced to Demolition'...

The Team Rim is based off of Demolition's Zero rim that has been around over a decade due to it’s strength and lightweight construction. Features a...

Sold in Pairs Designed With Team Input 10 Square Molded Pins Horizontal Concave for Grip Nylon Plastic Body for Extra Life 2 Unsealed Bearings Hea...

The Demolition Whistler ProPlus Front Wheel features Demolition's Whistler Pro front hub laced up to the new Zero Plus rim. The Zero plus rim is a ...

The Demolition Zero Lite Cassette Wheel features Demolition's Zero double walled rim laced to their popular Whistler Lite Cassette Hub. 14mm Male ...

The Demolition Zero Plus Rim is an updated, more beefy version of Demolition's long running Zero rim. After a decade of killin' the game, Demolitio...

The Dia-Compe 128 Tech 6 Locking Brake Levers to the eye seem to be identical to the originals from the 80's. The levers are sold as a set and both...

The Dia-Compe 883 Nippon Caliper Brake was one of the most sought after brakes in the BMX freestyle world in the 80's and 90's an is a must have fo...

The Dia-Compe 883 Nippon Caliper Brake was one of the most sought after brakes in the BMX freestyle world in the 80's and 90's an is a must have fo...

Re-issue Dia-Compe Tech 3 brake lever set. Remember these levers require "end buttons" as they have no threaded adjusters. Grab some here. Sold in...

DIA-COMPE Tech 2 / MX 120 2 Finger Brake Levers Sold as a set Fit standard 7/8" tubing 70's

The Ditto BMX 1984 'OG' 22" Fork are a super quality fork for the 22" shredders with a unique twist, removable brake mounts. Whether you just need ...

Pivotal Fat shape & design Textured grippy sides Weight: 341 grams (12oz)

The DK Dayton Stem is rightfully named after its birthplace, Dayton Ohio. Made in house in the Dayton workshop from aerospace grade 6061-T6 aluminu...

The DK Phase Lite USA Peg is a small, lightweight design intended for park/ramp use. The Phase Lite pegs are machined from 7075 aluminum, strong, b...

The latest iteration of the DK Phase stem is made in house at DK Bicycles in Ohio. Made from USA made aerospace grade 6061-T6 aluminum keeps a good...

The 22-inch version of the new Stun 1 tire isn’t just bigger, but better as it’s built to handle higher pressure with reinforced sidewalls (100psi)...

The Duo Stun 1 Tire  is a modernized version of the Stunner that was beloved by legends like Chris Doyle and Van Homan. Designed to be a great all ...

The Duo Tab Stealth Pivotal Seat is built on large sized base and wrapped in premium grade Audi perforated material. Securely stitched tab out back...

Eclat 1023 Stem CNC machined in Kyoto, Japan by Mullet Products 48mm reach 23mm rise (Top Load setup) Designed to be also run flipped (10mm) for a...

The Eclat Carbonic Rim are finally here after 3 years of R&D. The new Carbonic rim is an extremely stiff yet lightweight rim that still can hol...